The Axixtech 200 watt siren is a handheld siren amplifier designed for single or twin 100w speaker use with full hazard warning lighting control via the handset which also acts as a microphone (noise cancelling). Use the mini ‘DIP’ switches and pre printed durable, peel ‘n‘ stick button legends for extremely easy set-up and eliminate the hassle of defining software parameters on a laptop. Control Box
The control box can either be wired into the ignition switch or to a dedicated on/off switch within the vehicle. The control box houses the siren unit that can either be set in 100w mode using one 100w speaker or 200w mode by using two 100w speakers, there is even a 40w setting. It has up to seven high current (10 amps) switching devices (relays) together with the logic control for setting up positive and negative triggers. Mode of operation can easily be achieved by simply setting the mini ‘DIP’ switches on the side of the control unit to the appropriate position. Radio and siren volume settings are adjusted via the control box. Handset
The handset has a noise canceling microphone for PA use and push button override in all modes, the microphone volume is controlled via the handset. Five central buttons are dedicated to the primary operating modes of the siren, three buttons at the top of the handset are dedicated to primary lighting functions and four buttons at the bottom, one of which is dual function, for auxiliary lighting or other devices. If required, some buttons have a progressive switch function to allow multiple use. The handset buttons have a green backlight when not in use which turns red when in use. The handset is supplied complete with pop-out button plates and over 250 pre-printed legends, simply snap the button plate out of the retaining frame, add a legend of your choice and pop into place. Hands Free (HF) Operation
The siren can be activated by using the HF button. When this is pressed the siren is turned ‘on’ but goes into standby mode where no audio sound is produced, and the vehicle horn is disconnected (optional). Product Features
• On/off control is separate to power feed inputs
• Backlit control buttons that change from green to red when in use
• Simple mini ‘DIP’ switches change handset button functions
• Supplied with over 250 pre-printed handset button legends
• Seven buttons with 8x10 amp relay switching capabilities:
- 3 x interactive buttons
- 3 x latching, momentary or timed momentary buttons
- 1 x dual function buttons - ideal for traffic director bars
• Dedicated siren keys with switchable settings
• System siren can be set for:
- 40 watt mode
- 100 watt mode - single 100 watt speaker
- 200 watt mode - twin 100 watt speakers
• 5 x dedicated siren and radio re-broadcast buttons
• Separate power feeds to switched outputs to avoid catastrophic failure of the whole unit
• Built-in microphone for public address feature " | 
Products 